3D Touch Probe

3D Touch Probe With Cable used for measuring workpiece geometries such as edges, holes, grooves, studs, angles, and corners or scanning surfaces.

Version 6

Sensing directions: ±X; ±Y; -Z

Repeatability: ＜0.01 (Feed Rate: 50-200mm/min)

Max. stylus overtravel : XY = 4mm ; Z = 2mm

Operating voltage (power supply):  5 – 24V DC

Cable length: 2 m

Signal Type: Three Wire NPN NO

 When powered on, the green light is illuminated. When the probe is triggered, the red light is illuminated.